Home  >  Info  >  Processing Industry >  What is the standard of wire mesh roll?

What is the standard of wire mesh roll?

Feb 26, 2016


   Wire mesh roll is a general name for the steel wire, medium carbon steel wire, high carbon steel wire, stainless steel wire woven or welded into the net material.Production process are: ordinary weaving, knitting and spot welding type embossing. Is the main wire as raw materials, through processing into a network of professional equipment, so that the wire mesh.

   What is the standard of wire mesh roll?

   For the specifications of using wire mesh roll,the national standard has a certain requirement,diameter and grid size must be used for matching, rather than simply the diameter size and the plaster layer,the use of wire mesh roll is not greater than 20 x 20, the diameter is best not to is less than 1mm, the light is that there is not much meaning for the diameter and 40 x 40 x 0.9 and selection 10 * 10 * 0.6 wire mesh, which is better, I am afraid it is 10 * 10 * 0.6.The effect of wire mesh in the wall plastering is a major measure to prevent falling from a security perspective,for anti cracking, it is relatively small,because the location of the problem;And for external thermal insulation system, it is used in the brick veneer, as for the role, first of all, it should also anti drop followed by anti cracking. In this case, we should select the grid 10 x 10 x 0.6, these are some experiences, grid conversion from the state of steel wire mesh specifications, we adopt containing steel grade conversion.

   The index of wire mesh roll: mesh size, silk by square meters, content of steel, galvanized, it is mainly considered ability to resist the corrosion of the steel wire net and the system safety!Wire mesh, galvanized wire diameter is more critical, zinc content is very important, it must be hot plating, after welding, plating plating the first after welding is better than, as the wire diameter, we need comprehensive consideration of the construction site and meet the security need, 0.6 ~ 0.7 is good.
  

Prev: Angle drill bit is one of drill bits

Next: What is the environment of stainless steel screens?

Facebook Twitter Google+ Pinterest LinkedIn Addthis